SikaTack® Panel-50 is a one-part, non-sag silicone adhesive with a paste-like texture. It is used for structural joints in ventilated facades and interior wall cladding, where there will be static and dynamic stresses and high facade temperatures. The adhesive cures when it is exposed to atmospheric moisture to create a long-lasting elastomer. SikaTack® Panel-50 is a crucial component of the SikaTack® Panel system, which is designed for concealed, cost-effective fixing of ventilated facades.

Elastic fixing system, vibration and movement absorbing
Provides creative opportunities for facade design
Withstands high dynamic and static stresses and elevated facade temperatures

PRODUCT BENEFITS

Elastic fixing system, vibration and movement absorbing
Provides creative opportunities for facade design
Withstands high dynamic and static stresses and elevated facade temperatures
Uniform tension over the whole facade
panel (no stress points)
1-component product, ready to use
Outstanding UV and weathering resistance
Bonds well to a wide variety of substrates

Usage

SikaTack® Panel-50 is appropriate for structural joints in ventilated facades and interior wall cladding, connecting the panel subjected to dynamic and static stresses and elevated facade temperatures to the vertically installed substructure. The product is compatible with substrates such as anodised and coated aluminium, glass, metal composite, high-pressure laminate, and ceramics. This product is intended for experienced professional users only. Adhesion and material compatibility tests must be conducted on actual substrates and conditions to ensure effectiveness.

Packaging

Unipack

600 ml

Typical Product Data

Chemical base		1-component silicone
Colour (CQP001-1)		Grey
Cure mechanism		Moisture-curing
Density (uncured)		1.4 kg/l
Non-sag properties (CQP061-4 / ISO 7390)		Good
Application temperature	ambient	5 ─ 40 °C
Skin time (CQP019-1)		25 minutes ^A
Curing speed (CQP049-1)		(See diagram)
Shore A hardness (CQP023-1 / ISO 48-4)		38
Tensile strength (CQP036-1 / ISO 527)		2.1 MPa
Elongation at break (CQP036-1 / ISO 527)		450 %
Tear propagation resistance (CQP045-1 / ISO 34)		7 N/mm
Service temperature		-40 ─ 150 °C
Shelf life		9 months ^B

CQP = Corporate Quality Procedure

^A) 23 °C / 50 % r. h.

B) storage below 25 °C

Application

Surface Preparation

The cleanliness and dryness of surfaces are essential to achieve a long-lasting bond, therefore grease, oil, and dust must be completely removed. Additionally, the treatment required for the surface depends on the specific properties of the substrate, and it is crucial to ensure a durable bond.

Application

The standard geometry for bonding façade panels is at least 12 x 3 mm. The supplied nozzle (10 x 8 mm) ensures proper dimension of the compressed bead (see figure below).

The ideal temperature range for applying the adhesive is between 15°C and 25°C, and it should not be used at temperatures below 5°C or above 40°C. To prevent condensation, the temperature of the bonding components should be at least 3°C higher than the dew point of the air. Skin time may be shorter in hot and humid conditions. The panel should be installed within 75% of the determined skin time under local climate conditions. Never join bonding parts if the adhesive has formed a skin. SikaTack® Panel-50 can be applied using hand, pneumatic, or electric driven piston guns.

Removal

To clean tools and equipment from uncured SikaTack® Panel-50, use Sika® Remover-208 or a compatible solvent. Once cured, the material can only be removed mechanically.

If SikaTack® Panel-50 gets on your skin, wash the area immediately using hand wipes like Sika® Cleaner-350H or an appropriate industrial hand cleaner with water. Do not use solvents on your skin.

Products in cart
Product	Details	Total
	Available on backorder Previous price: Discounted price:	Save

Secret Bottom Clips (Stainless Steel)

Related products

Corner D Profile – DPE

Aluminium Channel Profile

Horizontal Rail Bottom Clip

Vertical Pointing Plug