Price for one box (contains 6pcs)

Unit: 1 box

Fast Curing.
Standard Guns can be used.
It can be used at low temperatures.

Usage

As a fast-curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and unique fastening systems
Concrete
Hollow and solid masonry

Hard natural stone^*
Solid rock^*

* These substrates may vary considerably, particularly in strength, composition and porosity. Therefore, for each application, Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area: Check-in particular bond strength, surface staining and discolouration.

Advantages

Fast curing
Standard guns can be used
It can be used at low temperatures
High load capacity
ETA Approval available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage

Packaging

300 ml standard cartridge

Six cartridges per box

APPROVALS / STANDARDS

Injection system for use in masonry according to ETAG 029, ETA-12/0227, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 0679, certificate of constancy of performance 0679-DPD-0777, and provided with the CE marking
Bonded injection type anchor for non-cracked concrete according to ETAG 001 annexe 1 and 5, ETA-13/0720, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-029816, and provided with the CE marking.

Shelf Life

12 months from the date of production

All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.

Storage Conditions

It was correctly stored in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect from direct sunlight.

Density

~1.63 kg/l (component A+B mixed)

Compressive Strength

~60 N/mm²(7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~3 500 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~28 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~12 N/mm²(7 days, +20 °C)

(ASTM D 638)

Thermal Resistance

Long term	+50 °C
Short-term (1–2 hours)	+80 °C

Glass Transition Temperature

+60 °C

(DIN EN ISO 6721-1)

Design Considerations

For details about adhesive anchoring design, refer to the separate documentation provided: “Technical Documentation Sika AnchorFix®-1” Ref: 870 43 01

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

3 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix®-1 must be at a temperature of between +5 °C and +40 °C for application.

Ambient Air Temperature

-10 °C min. / +40 °C max.

Dew Point

Beware of condensation.
The substrate temperature during application must be at least three °C above the dew point.

Substrate Temperature

-10 °C min. / +40 °C max.

Curing Time

Temperature	Open time – T_gel	Curing time – T_cur
+30 °C	4 minutes	35 minutes
+25 °C – +30 °C	4 minutes	40 minutes
+20 °C – +25 °C	5 minutes	50 minutes
+10 °C – +20 °C	6 minutes	85 minutes
+5 °C – +10 °C	10 minutes	145 minutes
+5 °C	18 minutes	145 minutes
–10 °C ¹ ²	30 minutes	24 hours

1 Minimum cartridge temperature: +5 °C

2 The scope of the product ETA or any other approval does not cover this application.

Visible Clip 304 Stainless Steel

Visible Clips 304 Stainless Steel

Related products

Visible bottom Clips

Double Bottom and Top Fixing Clips.

Horizontal Support Rail

Horizontal Joint Profile