Price for one box (contains 6pcs)

Unit: 1 box

Fast Curing.
Standard Guns can be used.
It can be used at low temperatures.

Usage

As a fast-curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and unique fastening systems
Concrete
Hollow and solid masonry

Hard natural stone^*
Solid rock^*

* These substrates may vary considerably, particularly in strength, composition and porosity. Therefore, for each application, Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area: Check-in particular bond strength, surface staining and discolouration.

Advantages

Fast curing
Standard guns can be used
It can be used at low temperatures
High load capacity
ETA Approval available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage

Packaging

300 ml standard cartridge

Six cartridges per box

APPROVALS / STANDARDS

Injection system for use in masonry according to ETAG 029, ETA-12/0227, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 0679, certificate of constancy of performance 0679-DPD-0777, and provided with the CE marking
Bonded injection type anchor for non-cracked concrete according to ETAG 001 annexe 1 and 5, ETA-13/0720, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-029816, and provided with the CE marking.

Shelf Life

12 months from the date of production

All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.

Storage Conditions

It was correctly stored in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect from direct sunlight.

Density

~1.63 kg/l (component A+B mixed)

Compressive Strength

~60 N/mm²(7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~3 500 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~28 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~12 N/mm²(7 days, +20 °C)

(ASTM D 638)

Thermal Resistance

Long term	+50 °C
Short-term (1–2 hours)	+80 °C

Glass Transition Temperature

+60 °C

(DIN EN ISO 6721-1)

Design Considerations

For details about adhesive anchoring design, refer to the separate documentation provided: “Technical Documentation Sika AnchorFix®-1” Ref: 870 43 01

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

3 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix®-1 must be at a temperature of between +5 °C and +40 °C for application.

Ambient Air Temperature

-10 °C min. / +40 °C max.

Dew Point

Beware of condensation.
The substrate temperature during application must be at least three °C above the dew point.

Substrate Temperature

-10 °C min. / +40 °C max.

Curing Time

Temperature	Open time – T_gel	Curing time – T_cur
+30 °C	4 minutes	35 minutes
+25 °C – +30 °C	4 minutes	40 minutes
+20 °C – +25 °C	5 minutes	50 minutes
+10 °C – +20 °C	6 minutes	85 minutes
+5 °C – +10 °C	10 minutes	145 minutes
+5 °C	18 minutes	145 minutes
–10 °C ¹ ²	30 minutes	24 hours

1 Minimum cartridge temperature: +5 °C

2 The scope of the product ETA or any other approval does not cover this application.

Products in cart
Product	Details	Total
	Available on backorder Previous price: Discounted price:	Save

Visible Clip 304 Stainless Steel

Visible Clips 304 Stainless Steel

Related products

Corner D Profile – DPE

Corner D Profile – DPI

Horizontal Joint Profile

Visible bottom Clips